top of page
FAKTUM_Logo_neu (1).jpg

OTTOSEAL S110, 310ml

Faktum_Silikon.png
farbtafel-ottoseal-s110_600x600.jpg

Price: 21.500 MNT incl. VAT / per piece

Discount: 5% Discount from 48-piece / 2 Box / order

                    7.5% Discount from 96-piece / 4 Box / order

                    10.0% Discount from 192-piece / 8 Box / order

Colour: 82 standard colors available

 

Its excellent smooth ability, it not being very stringy and the unequalled

multitude of colors make OTTOSEAL 1-component silicone sealant based on oxime, neutral cross-linking, MEKO-free.

Uses

  • For indoor and outdoor application

  • Windowpane sealing on wooden windows

  • Sealing of joints on windows and doors made of wood, metal and plastic

  • Sealing double-glazing (e. g. "Profile")

  • Expansion joints on prefabricated concrete and cellular concrete units

  • Sealing of joints on façades, metal constructions

  • Suitable for sealing glazing units

  • Expansion joints in bathroom, kitchens, toilet and other tiles areas

Advantages

  • Highly abrasion-resistant and streak-free according to ift-guideline VE-04/2

  • Cleaning without streaks

  • Contains fungicides / Resistance to mold infestation /

  • Compatible with PVB sheets according to fit guideline DI-02/1 - Suitable for processing VSG

  • Non-corrosive / No (oxidation) corrosion on unprotected metal surfaces /

  • Particularly good adhesion on many substrates even without primer / Often primer less processing possible, see primer table in technical data sheet /

  • Excellent early resistance to stress / Safety in the production process /

  • Good compatibility with paints according to DIN 52452 (not paintable) / No interaction with existing and adjacent coatings /

  • Excellent weathering, ageing and UV-resistance / For long-lasting indoor and outdoor applications /

  • Stress expansion modulus at 100 % (ISO 37, S3A): 0,4 N/mm²

Application

In practice, floor-to-wall joints - especially in the sanitary area - have narrow joints,

where, due to the narrow joint diameter, no rectangular joints are formed can. A triangular joint can be formed here, for its professional creation a Round cord to prevent three-flank adhesion is to be introduced.

The following requirements must be met for a permanently tight joint:

  • The sealant itself is intact and properly sized to accommodate the movements of the materials to be able to absorb (cohesion).

  • The sealant adheres permanently and securely to the materials to be joined (adhesion).

Therefore, in addition to the right choice of sealant - depending on the requirements of the joint – the Surface preparation for permanent adhesion of the sealant to the substrate decisive factor. The surfaces must be dry, free of dust and grease and free of non-stick parts (voids, Paint residue, rust, etc.) so that the sealant can adhere to it. Besides requiring cleaning some surfaces also must be prepared with a primer so that the sealants adhere can. Primers depend on the material to be bonded. Due to the many possible influences during and after application, the customer always must carry out trials first. Please observe the recommended shelf life which is printed on the packaging. We recommend storing our products in unopened original packaging dry (< 60 % RH) at temperatures of +15 °C up to +25 °C. If the products are stored and / or transported at higher temperatures / air humidity for longer periods (some weeks), a diminution of durability or a change of material characteristics may arise.

Please therefore note the product-specific information in the respective technical data sheet.

maxresdefault.jpg
bottom of page