Edge PROTECTOR TRIM Aluminum 2,5 Meter x Different Heights
Edge PROTECTOR TRIM Stainless Steel 2,5 Meter x Different Heights
Price: Upon request
Discount: 10% Discount from 60 Meter order
Heights: 6, 8, 10 and 12,5 mm
The use of BLANKE TILE ENDING RAILS makes sense wherever the edges of the tiles are exposed to strong mechanical stress or where clean edges and corners cannot be guaranteed. But also, for decorative reasons, finishing rails can be laid for tiles.
Made of brass, aluminum, or stainless steel
Uses
Further applications are, for example, transitions between different floor coverings (e.g. tiles to carpets), wainscoted socles, clean and decorative stair edges (in the interior) as well as limitations of surfaces or fields of any kind. Ideal for a clean limitation between floor coverings such as carpet, parquet, laminate, natural stones or two components resin (Epoxy and Polyurethan).
Advantages
Protective
Decorative
High load capacity (stainless steel)
Application
BLANKE EDGE PROTECTOR TRIMS triangularly punched fixing leg must be chosen according to the thickness of the tile. Apply tile adhesive with a notched trowel exactly in the zone where the tile covering is to be limited. Press the Blanke Edge Protector Trims with its triangularly perforated setting leg into the mud bed and align it. After that, firmly press the tiles and align them so that the trim’s upper edges flush with the tile (the trim is not supposed to be any higher than the floor covering surface, it can even be lower by approx. 1 mm). Install the tiles without any air voids. There should be a joint of 1.00 mm even up to 1,5 mm.
Fill in mortar into the complete joint between the tile and the trim. For stainless steel cleaning purpose, please do not use steel wool or a steel brush, because the abrasion could cause corrosion. Any cleaner you use, must be free of hydrochloric and hydrofluoric acid. Aluminum is sensitive to alkaline. Cement materials in connection with humidity show an alkaline reaction and can lead to corrosion, depending on the concentration and the reaction time (development of aluminum hydroxide). Mortar or filling materials for joints on the visible part of the trim must immediately be removed.
